Poor sound quality from product

If there is too little bass, see Too little bass or too much treble from product.
If there is too much bass, see Too much bass or too little treble from product.

Set the device volume to 90–100% to send a strong signal to your product. Then, use your product to adjust the volume level.

Be sure the bass and treble adjustments are not set too high or too low for your preferences. For more info, see Adjusting the tone controls on your product.

Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more info, see Resetting your product.

If the issue only occurs with a particular app, it is likely related to the app or app settings.

Electronics might need to be reset on occasion to correct minor issues. This is typically done by turning the device off, then powering it on again.

The EQ settings of your Bluetooth device can affect sound. On the device, try setting the EQ to "off" or "flat" and disabling any other sound playback adjustments (i.e. loudness, compression, reverb, etc.). These settings are commonly found in the device's audio settings or in the settings of the app being used to play audio.

This range can be reduced by obstacles (e.g. walls, doors, appliances, other wireless devices, etc.). Try moving the device and product closer together.

Electronics can pick up interference from other electronics connected to the same power circuit or connected within close proximity. Try disconnecting the power cord from any such nearby electronics (i.e. laptop/phone charger, TV, cable box, seasonal lights, microwave, etc.). If the issue is resolved, try connecting the device or your product to a different power circuit or farther away.