Back to article
3344
No power
If your product is connected to power but does not appear to be receiving power, try the following:
Check the source of power
If using aircraft power, check the aircraft fuse or circuit breaker.
Avoid pressing the power button repeatedly when attempting to turn the headset on or off.
The headset can take up to 6 seconds to turn on or off. Each additional press of the power button will cause the headset to take longer to complete the desired action.
See if the power light is lit on the headset control module.
The LED light on the control module should light when powered on. Press the power button once to turn on the headset, then see if the light is lit. For more info, see Understanding LED indicator status lights and information.
Replace the batteries.
Remove the batteries from you product, then insert new batteries. Check that the + and – markings on the batteries match the markings in the battery compartment. (Note: Rechargeable batteries are not recommended. Use alkaline batteries when possible.)
Your product may need service.
If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.
Click here to start service
Click here to start service
Was this article helpful?
Thank you for your feedback!